Wednesday, June 10, 2015

HRT With A Twist ~ Block Tutorial

Half Rectangle Triangle With A Twist Block 

I've been having lots of fun making this block using my hand dyed scraps.  There are HRT's and a couple of partial seams involved, but don't let that scare you away!  It's super easy!

The block will be 8 1/2" square unfinished and 8" square finished.

HRT WITH A TWIST
8" x 8" FINISHED BLOCK

You will need 4 HRT's and one 2 1/2" square for each block.  Another method of making HRT's is by Latifah Saafir for The Modern Guild. 

  
I began by cutting half triangles.  I lined up the center line on the edge and the bottom of the template on the bottom of the fabric, and cut. 


Because I want my rectangle orientation to be the same, this method will ensure that I get exactly what I need.  


Pair two pieces together being mindful that the orientation of each set is the same.  I like to pin mine before I sew just to make sure!


Stitch using 1/4" seam.  Press seams.  I usually press my seams toward the outside (in this case the grey fabric).


Trimming the blocks.  I line up the 30 degree line from my ruler with the seam and trim the long edges.  Trim your HRT's to 5 1/2" x 3 1/2"


Perfectly rectangle!


On one side of the 2 1/2" square you will want to mark 1/4" from both edges.  This will be your partial seam guide.  You really only need one dot marked, but I find it easier to have two dots ensuring that I place the square correctly. 



Line up both edges with your square and HRT, right sides together and pin.  Start by placing your needle in the down position right on the little dot where my finger is pointing to.  Back stitch and continue sewing to the edge.  Press. 


This is what you get.  A 1/4" that is not sewn down.


Place another HRT on the left edge, sew from top to bottom, press.


Repeat with the third HRT and press.  This what we have so far.  Now the tricky part, which isn't all that tricky!  Maybe the way I explain it will be!!


Pin the final HRT.  Here is a great tutorial for partial seams by Faith at Fresh Lemons.    


The pin is placed through the dot on the square.  This makes it easy to know where to stop. Start at the edge and sew towards the center.  Backstitch when you get to the dot. Press.  


It will look like this, meeting up at the dot.


The final seam!!  Flip your final rectangle so the edges meet (right sides together). Sew along the edge, press and viola!  you are finished. 


I've made a few different sizes with my hand dyed scraps.  Soon they will become something! See the small block on the bottom?  The HRT orientation is going the 'other' way.  


Looking for different sizes? 
16" Square:  4 ~ 10 1/2" HRT's, 1 ~ 4 1/2" Square
12" Square:  4 ~ 8" x 5" HRT's, 1 ~ 3 1/2" Square
7"   Square:  4 ~ 5" x 3" HRT's, 1 ~ 2 1/2" Square
5 1/4" Sq:     4 ~ 4" x 2 1/4" HRT's, 1 ~ 2 1/4" Square 

There are always options...



Thank you for stopping by!  If by chance you try this block, let me know how it turned out. I'm still learning the fine points of pattern writing, I try and make every effort to be as accurate as I can!


LINKING:

20 comments :

  1. Great tutorial - I'll have to give this a go!

    From 2015 New Bloggers

    ReplyDelete
    Replies
    1. I hope you do get a chance to make this block! If you do let me know how I did on the tutorial instructions!

      Delete
  2. Great tutorial Jayne - I've done a few y-seams before so I know they're nothing to fear and I really like the way you broke this process down.

    ReplyDelete
    Replies
    1. I'm still learning the fine art of tutorial/pattern writing. My biggest fear is over explaining or having my measurements off! Partial or "Y" seams are a breeze compared to writing!!

      Delete
  3. How cute is that!! Partial seams don't scare me, I have done several. I really wish I could just go play this afternoon!! I love your all colored block a lot :-) I have the HST block loc ruler, so I might just use that-after all, I have it I should use it right!

    ReplyDelete
    Replies
    1. I'm happy to say partial seams no longer scare me either! I rather enjoy them! I Didn't even think about using the HST Bloc-Loc ruler for these, I know they have a HRT one as well and I toyed with the idea of getting one. Maybe if I do many more!

      Delete
  4. Hi Jayne! I really love your blocks with happy colours! thank you for a great tutorial! x Teje

    ReplyDelete
    Replies
    1. I hope to finish my pile of blocks today and then of course, what to do with them!

      Delete
  5. Hi Jayne, Thank you for the awesome tutorial on HRT blocks. I really like the multiple color blocks. I'm going to share the tutorial via Facebook with my quilt club.
    Patty @ Walnut Street Quilts, 2015 NWBH

    ReplyDelete
    Replies
    1. Thank you Patty for stopping by and especially for sharing this tutorial! I really became obsessed with this block and hopefully I can get my stack finished today! I hope your quilt club enjoys the tutorial/block!

      Delete
  6. Oh Jayne I am seriously in love with these blocks! I pinned it twice so I can find it again. Your fabrics look terrific done up like this!

    ReplyDelete
    Replies
    1. Thank you for pinning the block! It is so hard to write a tutorial for me, at least one that sounds like I know what I'm talking about. I'm learning, that's what I keep telling myself!

      Delete
  7. So stinkin' cool, Jayne! Thanks for the tutorial!!!

    ReplyDelete
  8. I haven't tried any Y seams before. Your tutorial makes it look quite simple. I think I will give it a go! thanks very much!!

    ReplyDelete
  9. This is such a clever block, Jayne! I love that partial seams just sound impressive.... But they really are easy! Love your design and tutorial. Looking forward to seeing what you do with these lovely blocks!

    ReplyDelete
  10. Great block, beautiful colors and super tutorial! (I'm directionally challenged but your tutorial is wonderfully clear, just what I love. Thanks!)

    ReplyDelete
  11. I love the way you take your photos. They are truly exceptional - great lighting and the camera is straight on. You should teach photo classes!

    ReplyDelete
    Replies
    1. I struggle with pictures and generally take a ton! Thankfully we don't have film to deal with any more, or we would all be broke.

      Delete
  12. Excellent tutorial, simple clear steps.
    I tried it at 12" and it came out perfect at 12" inches, unfortunately I thought it would be 12" finished and didn't compensate for the extra half inch, but hey a nice little frame will set it off nicely. Wish I could post a picture as it came out very striking. Blacks and Brights

    Dino

    ReplyDelete
  13. What size are the starting triangles? (length of the sides abutting the right angle)

    ReplyDelete

Thank you for visiting my blog! I love getting comments, and try to respond to each and every one.