Highlight It !

So, it happened.  My desire to acquire Kona's Color of the year is done.  I don't often get excited about any color of the year, whether it be Kona's or Pantone's.  Let's face it, the colors usually don't spark a desire to dabble with them.

Then I saw Highlight.  I'm thinking this could be a color I could get behind!  I ordered a yard and then a day later decided it might be a good idea to up my order.  Two yards was respectable!  I could play with it and not worry too much about running out!

Then I figured while I was getting one, I may as well get something else.  Essex Line in Graphite.  Don't they look good together?  Not my intention, it just happened!!

I have an idea of where I would like to take the Highlight fabric.  I just need to work on the details!  

Do you buy fabric and wait for an idea to hit you?  Or do you just plain buy fabric?!  No shame in that, right?!

This fabric was purchased from Pixiespit Studio on Etsy.  This fabric was super reasonable and the owner was more than happy to up my order!  In continuous pieces no less!

Who's jumping on the Kona Highlight band wagon??  

LINKING:

Sunday Stash

Anomalous ~ A Quilt

Officially, the first completed quilt of the year!  As always, it takes a little bit of time to get back in to the swing of things.  For the past couple years the first quilt of the year has been one made of my hand dyed fabrics, this year was no exception.  Funny how a tradition in born without even knowing it!

This one may be a little different than previous years.  Usually it involved a huge stack of half square triangles.  This time my goal was to use scraps.  Strips and strips, piece after piece.  In order to keep things under control and avoid fabric chaos, I got in the habit of cutting scraps in to squares or in this case strips.  The strips varied in width and length ~ 1" to 2" wide.  They would become something one day, that I was sure of.  

So, I brainstormed.  An idea eventually started to form, and I began the long process of piecing blocks.  Many of my ideas start small and I work through them as I go.  This was going to be another one of those! 

Width of the blocks wasn't as important as the height of the blocks.  Most were 7" high, but for variety sake, I threw in some 6" blocks.  

The trick was how many blocks?  How many rows?  Do I really know what I'm doing?! Ultimately, I settled on 5 vertical and 12 horizontal rows.  To make things even crazier, each row was going to be different.  

While I tried to keep the vertical blocks semi centered, not one row is the same.  I've seen many stacked quilts where the math is the same for each row.  You just stagger each row. This is not that quilt.  You see...I love to do it the hard way! 

My basic layout was settled on, the real test would be adding the grey in between! Controlled, yet not.

Somehow I managed it.  Somehow it came together just as I had hoped it would.  Somehow the clouds parted and a ray of sunshine ... maybe not.  

Basting.  Pinning and pinning and pinning.  After which it sat for a week.  I stared at it for a solid week wondering if I should get crazy with it or keep it simple.  

I know this will be a surprise to some of you, a real shocker in fact...but it was straight line quilting to the rescue!  

For each horizontal row, I quilted random width lines.  The exception was and occasional 6" row where it was just 1/2" lines.  

I couldn't be happier, especially after once it was pulled from the drier!

While I was making this quilt, I took meticulous notes.  For me, really great notes.  Or so I think!  Once I work up an EQ7 design I'll show you just how crazy I got with it!

Anomalous
52" x 69 1/2"

Anomalous:  deviating from or inconsistent with the common order, form or rule; irregular or abnormal

I'm not sure Anomalous is the best name for my quilt.  I'm trying to be clever...Stacked works too...but it's a little boring!  

Quilting wasn't the only thing put on the back burner!  Between the bitter cold, wind, ice, snow and now rain, it has been tough getting great pictures.  I had to become creative, but use what I could.  A few inside, a few on the screen porch and the bedroom floor worked well for a couple too!  

What do you do if Mother Nature won't cooperate for your photo shoot?  I was impatient. Waiting is not my strong suit!  

LINKING:

TGIFF

Can I Get A Whoop Whoop

Crazy Mom Quilts

OH Scrap!
Sew Cute 

Epic Sampler BOM

Late last year, before things became crazy with the holidays, I decided to join another Block of the Month.  I tend to fall behind (way behind) with these, and then have a marathon session to catch up...only to repeat the same process a few months over again.  I've nearly accepted that that is the way I work with a BOM!

Elizabeth Dackson from Don't Call Me Betsy started the Epic Sampler BOM in October. The finished quilt will be 60" x 72", consist of 6" and 12" blocks, some paper pieced and there will be three blocks a month.  

It didn't take long for me to become behind!  I was behind before it even started!!  Four months later, I decided I better get my butt in gear!  But wait!!  I didn't have a clue what colors or fabric I was going to use!  Same old, same old!  

After a couple attempts with the color sheet, I settled on a rainbow theme.  This will be my guide.  Since there are three blocks per month, and they aren't in any particular order, it will be interesting to see how this will play out.  The background will be a combination of white and grey.    

This is a good old classic!

12" Paper Pieced
Bear Paw

If you want to learn paper piecing, I think this is a perfect block to start with.

6" Paper Pieced
Economy Block

I lost my way on this one!  With 37 pieces, I easily became confused.  In the end I changed it up and decided it will be just fine!

6" Paper Pieced
Pineapple Block

I am in LOVE with this block!  I see a future in this one, by far my favorite!

12" Paper Pieced
Less Is More

Top Left: Patchwork Wheel, Top Right: Churn Dash
Bottom Left: Exploding Star, Bottom Right:  Color My World
6" Blocks

How about that Vinyl WIP bag?!  It's the perfect size to hold and keep all by finished BOM blocks safe and sound!  

I bought more vinyl for a new idea I have brewing in my head!  Stay tuned for that, it should be interesting...she said with her fingers crossed...

Clear Vinyl WIP BagsCrazy Mom Quilts

Three more blocks to go and I'll be caught up!  Yay!  Picking colors and fabric for a project is difficult for me, it always has been.  And I often wonder why I make it difficult for myself. Especially for a BOM.  In the end, I go with my gut and as always...fly by the seat of my pants!

Tell me what you think?  Do you like Block of the Month clubs?  Are you participating in one now?  Do you enjoy them?  

LINKING:

WIP Wednesday

Let's Bee Social 

Needle & Thread Thursday

  

Hexie Name Badge

My name is J.A.Y.N.E.  

For our next Music City Modern Quilt Guild meeting we were encouraged to make name badges.  Which is an excellent idea!  I have a hard enough time remembering my own name, let alone an ever growing group of people!

1/2" Hexie Name Badge
3 1/2" x 3"

With a little time on my hands, I got a jump start on my badge.  Actually I finished it! 

I busted out the 'small guns' ... 1/2" hexies.  They seemed like the perfect size and idea for a name badge.  

I started with five pink hexies for my name.  And then grabbed a print charm square I had in my stash for the rest.  Eventually I figured out how I wanted the layout and began sewing them together.  Because they are small it went really fast.  

With simple block letters written using a frixion pen, I grabbed some embroidery floss and chain stitched my name in black.  

Beyond this first part I had no idea how or what to do next.  I could quilt it, I could do it by hand, but I decided to keep it simple instead.  It is a name badge, not a mini quilt!!

After rummaging through my interfacing stash, I grabbed my Peltex 71F Ultra Firm stabilizer. It's a one sided fusible and very stiff.  I was hoping it would do the job and make this work.  

I traced the shape on to the fusible side and marked where the top was going to me.  It would be just like me to mess something so simple up!  It was protection to guard against a simple and honest mistake!!

When I cut the shape out, I cut inside the lines just a little bit.  I didn't want the interfacing to show on the front.

After a good long pressing it was fused the the hexie front just as I had hoped it would.  I intended the Peltex 71F to be the back in all it's glory...boring, but it isn't going to show!  For added assurance that the front and back stay together, I stitched an 1/8" around the edge.

It may not be amazing or stunning, it may be funky and wonky...but it will serve it's purpose well.  It was time to 'stick a pin in it', it's done! 

It's perfectly imperfect...just like me! 

LINKING:
Tips & Tutorials